Customer Reviews for VEVOR Torque Multiplier, Heavy Duty Torque Multiplier Wrench Set, 1 Inch Drive Lug Nut Wrench Torque Multiplier, 1:58 4800N.m Lug Nut Remover, with 8 Sockets and Storage Case for Truck Trailer RV

Great tool, great price,good quality and value. Super service, item got lost, replacement was shipped out immediately, thank you very much.

This tool is a life saver specially with high torqued nuts Good customer service

Super Produkt

Solido e affidabile

I have had great success with every thing I have purchased from vevor

Had a seized wheel bolt on an old LT35 van. Tried penetrating oil. Tried an 1000nm Makita Impact Wrench allot. Tried Heat (butane torch), Tried Cold (-50 spray). Tried a breaker bar with a massive extension. NO LUCK at all. SO I bought this as a last attempt, I had to buy a 1" to 1/2" adapter and use 2 19mm sockets as there is no 19mm socket in this kit. 1. Place 1 socket is on the bolt you are undoing. 2. Place the other socket on the bolt you want brace the torque multiplier against. 3. Attach the torque multiplier to the socket you want to turn. 4. Brace the arm against the second 19mm socket and wind. 5. Hopefully success!

Item arrived no problem. Took it to bits and it was newly greased inside. Great value for the money. My back is pleased. I got a 1" to 1/2" adaptor on ebay so it can be used with my general tools It took a couple of old wheel nuts off like they hadn't even been tightened up This thing is weighty in the hand but it's like having 3 blokes and a 6 foot breaker bar in your boot. No air, no electrics,no hydraulics, probably cranks out 1000 to 1500 foot pounds when the handle starts getting tight, which is a LOT, plus it keeps that full pressure on constantly, like a hydraulic tool would in a fully equipped workshop. For the money it's a no-brainer

Ottimo prodotto

This thing makes taking lug nuts off a semi child's play. Takes about 10-15 cranks of the handle and a 1/2" cordless impact will take them right off for 1/4 of the price of a 1" air gun and no hoses or cords needed.

You can tell it’s a generic brand but works well and as it should . It takes off semi tires/ rims ( loosen lug nuts) with ease!!!