Customer Reviews for VEVOR Router Sled, 60 inches, Portable and Easy to Adjust Slab Flattening Jig, DIY Woodworking Router Sled for Flattening Slabs, Slab Guide Jig Trimming Planing Machine for Wood Flattening, Home DIY

Sled works well. A little bit of a learning curve setting it up for the first time. I would recommend.

Gut durchdachtes Gerät. So wie die meisten Produkte, die ich hier gekauft habe Würde ich wieder kaufen.

Buen material para trabajar con madera, poder aplanar tablas y dar dimensiones perfectas, el trineo es amplió para tablas con un ancho considerable

sencillamente perfecto, lo compre para planear una mesa y el resultado a sido mejor de lo que me esperaba.

It worked really good. The only drawback was the little bolts would work loose then the rails would move. That the only thing I have any trouble with. I would recommend this item.

I have a 31" bandsaw mill of which I mostly cut live edge pieces for counter tops and tables. Some of the harder woods I need to plane and this sled has saved me lots of time and money. I recently bought a table saw fence system to convert to a slab flating system however it didn't work out that well. After cutting this sled to a size I would mostly be working with it has served me well . I have made several counter tops and tables that have not only paid for the sled but has taken my wife and I out for several very nice dinners. Thanks Anyone interested in a slightly used table saw fence system you can contact me at caldwellrobert13@gmail.com

Très bonne qualité robuste. livraison rapide, bien emballé. Montage un peux pénible pas de guide d'équerrage.

tutto ok ,un buon compromesso qualita prezzo facile da usare , personalmente non so come fissare fermare i pezzi da fresare

If I were to buy a sled again I would make sure of two things . 1) that the sled has some L-brackets that allow more Hight so you can put a thicker piece of wood in. I think there is another model that has those L-brackets . 2) the 4 black plastic clamps that hold the clear plastic base that the router is attached to ( & slides ) are crap . They don't tighten very well . I ended up using clamps to hold the router in place . Speaking of the clear plastic base ( 2 were supplied ) , it would be so much better if the base had some ball bearings to help it move as it is very tight in the slots & difficult to move left & right .

Wish there was a height adjustment but works anyways