Customer Reviews for VEVOR Router Sled, 60 inches, Portable and Easy to Adjust Slab Flattening Jig, DIY Woodworking Router Sled for Flattening Slabs, Slab Guide Jig Trimming Planing Machine for Wood Flattening, Home DIY

It is an excellent router sled. mounted it on a Vevor linear guide rail set which was mounted on a very flat workbench I made. While it is not absolutely necessary, it is nice if your router can extend the collet nut down low enough to change the bit. Chat GPT gave me a few options and I settled for a good deal I found on the Triton MOF001.

It works great slides and rolls freely very sturdy the only thing is from router plate to material is over a inch you need a long shank bit or it will wobble but still impressive

I have used this for a few projects before I wrote a review and I’m impressed with how well it’s built and so easy to set up and use this has saved me a lot of time and gives consistent results time after time. Highly recommended

Would recommend this router sled. Heavy duty and a quality product. Used it to flatten a river table made out of Walnut. Very happy with this and expect a lot of use out of it. Set up plywood with a 1x3 clamped on each side with 2 inch walnut river table in the middle. Put wheels of sled on 1x3 to give it right height to move router back and forth. Worked beyond my expectations.

Dit is een uitstekend apparaat, werkt eenvoudig en probleemloos. Hoogte instellingen zijn beperkt, daarvoor kun je beter de grote versie nemen

Très bonne qualité robuste. livraison rapide, bien emballé. Montage un peux pénible pas de guide d'équerrage.

tutto ok ,un buon compromesso qualita prezzo facile da usare , personalmente non so come fissare fermare i pezzi da fresare

If I were to buy a sled again I would make sure of two things . 1) that the sled has some L-brackets that allow more Hight so you can put a thicker piece of wood in. I think there is another model that has those L-brackets . 2) the 4 black plastic clamps that hold the clear plastic base that the router is attached to ( & slides ) are crap . They don't tighten very well . I ended up using clamps to hold the router in place . Speaking of the clear plastic base ( 2 were supplied ) , it would be so much better if the base had some ball bearings to help it move as it is very tight in the slots & difficult to move left & right .

Wish there was a height adjustment but works anyways

Très bonne équipement pour le prix le plestiglass préféré ne marchait pas pour ma toupie et l'autre plesstiglass que j'ai percer pour mettre ma toupie a fixuré assez rapidement.mais le reste va numéro un je la conseil a tous le monde