Customer Reviews for VEVOR Torque Multiplier, Heavy Duty Torque Multiplier Wrench Set, 1 Inch Drive Lug Nut Wrench Torque Multiplier, 1:64 6800N.m Lug Nut Remover, with 8 Sockets and Storage Case for Truck Trailer RV

I tried it out on my Foretravel Motorhome, the torque is over 550 ft lbs on the 22.5 Aluminum wheels. It removed them with that tiny handle supplied with the kit. I was ready to use a long handle ratchet or a 24" Breaker bar, but didn't need anything else but that little crank handle. I was wondering if it would scratch my rim, but it uses the lug nut next door. Never touched the rim. The rears, which are deeply set on the duals, also had room to do the same. Of course, after removing the beauty caps and center hub cover. It wouldn't be any different, if you used an airgun or extension and breaker bar. Were was this thing 25 years ago when I changed out big pay loader tires? Would have been a breeze. Just make sure you have the correct socket for your rig. Don't measure the chrome caps, it's the steel ones underneath. If you have two piece lugs, you'll need the square socket for the inner. They're probably left hand thread, so tighten is actually loosen. The inner is opposite thread of the outer on that style. It should be stamped on the lug if you have doubts. I may not use it, but I'll carry it anyway. Just in case, I need to pull a tire to repair, or do an airbag.

It is a must have when working on heavy equipment

Nice and efficient for changing heavy duty truck tires.

tökeletes..

This is great thank you !

Worked perfect, I have a mercedes e320 cdi so removing the tire took more steps. I had to order a 17mm 3/4\" drive socket and a 1\" to 3/4\" adapter. Then used another 17mm socket with an extension attached to put on the tire bolt besid the one I was loosing so that th \"foot\" of the torque tool could leverage. Worked like a charm. Apparently the tire shop used at least a 3/4\" impact to torque the tire down cause my 1/2\" dewalt impact couldn't get it off and the tire tool with a 4\" cheater bar broke in half. Totally worth the money, plus I bought a used tool so I got it at a discount.

Perfect for our bus, very easy to use and store.

This tool worked great and the price was the best I found anywhere online. It was the first Vevor purchase I made, and I've made several since this one. Removing or installing lugs nuts on a commercial vehicle is no joke, but this toll makes it a lot easier. Just amazing. Thank you!

This was my last ditch attempt to get wheel nuts off an old backhoe. I first tried penetrating oil, 3/4" impact driver, broke the first breaker bar, could not move them with a monster breaker bar and long pipe extension. This tool had them off quickly. I wish the crank was more secure on the shaft. Th nuts broke free with a bang that would knock the handle off. No worries though, it's safe

Excellent does what it should. My lady friend can use it with ease. A must for her coaster.