Customer Reviews for VEVOR Router Sled, 64 inches/162.6 cm, Portable and Easy to Adjust Slab Flattening Jig, DIY Woodworking Router Sled for Flattening Slabs, Slab Guide Jig Trimming Planing Machine for Wood Flattening, Home DIY

If I were to buy a sled again I would make sure of two things . 1) that the sled has some L-brackets that allow more Hight so you can put a thicker piece of wood in. I think there is another model that has those L-brackets . 2) the 4 black plastic clamps that hold the clear plastic base that the router is attached to ( & slides ) are crap . They don't tighten very well . I ended up using clamps to hold the router in place . Speaking of the clear plastic base ( 2 were supplied ) , it would be so much better if the base had some ball bearings to help it move as it is very tight in the slots & difficult to move left & right .

Wish there was a height adjustment but works anyways

Très bonne équipement pour le prix le plestiglass préféré ne marchait pas pour ma toupie et l'autre plesstiglass que j'ai percer pour mettre ma toupie a fixuré assez rapidement.mais le reste va numéro un je la conseil a tous le monde

I'm impressed. I've used it once and am quite pleased with the performance. The design is quite adaptive. Easy-to-use. Good quality and value for the price.

Easy to setup, good to use, need more explanation on how to use the router stops, and information on availability of getting height extensions like the other model uses.

Made decently. If you have to make alterations, it is sort of a pain in the neck. They use allen key bolts to secure the edges where the wheels ride the side of the table or L bracket. If they were knobs to tighten or adjust it would be much more convenient. Overall, after learning the quirks and adjustments, it works as it should. Just be patient and it will take a little longer than you expect to set it up.

It was delivered missing parts and was never able to use product

Good product just no way to raise and lower sled

Rolls nice. Router plate doesnt slide very nicely without greasing. This is one of the few vevor tools I would say not to buy! Get the rockeler or spetool. Far more expensive but won't gouge your 5000 dollar table. Do not reccomend this. I would say vevor should refund this tool to anyone who purchased it or offer a spetool replacement for the ruined.producr this tool has destroyed. 0/10

It's a great tool for the price, 4 locking devices to keep plate from moving sideways does not work at all, at least with the blank plate provided. I installed a Triton TR001 and even using the 4 pieces, the router did not stay in place. The biggest issue I had was to keep the wood chips from "glueing" to the wheels. I spent way more time cleaning the wheels and the surface where they travel than actually leveling the piece. Brushes provided don't do much. It would be great if Vevor offer vacuum setup as other manufactures do. I would pay extra for it.