Customer Reviews for VEVOR Cyclone Dust Separator, 4" Retrofit Cyclone Separator for Dust Collectors, ABS Dust Deputy With 2" Hole O.D. Connector & Hose for Wet/Dry Shop Vacuums, Fits 18.9-37.85L Tank (Tank Exclude)

Muy buen ciclón la nueva herramienta del taller 👍

Foarte bun! Îmi pare rău că din greșeală am dat pe cel fără butoi și nu am avut cum să modific, iar butoiul separat se pare că nu este sau dacă este, mi-ar plăcea ca Vevor să mă ajute.

If your expecting for super dust deputy quality you may be disappointed. Mut if your looking for something close that will separate the chip and most of the dust it great hooked it up to my HF 2hp dust collector with 2 20 foot runs of 4in pipe and 5 blast gates in my small shop. Filled 3 30 gallons drum of dust but only have maybe 1/4 gallon of dust in the collector bag. Very much worth the buy and saved alot from the super dust deputy so buy all the blast gates, pipe and hoses. Great for a small woodshop. Run it on a bandsaw, cabinet saw, jointer, belt sander, and lathe chute.

Dit is een zeer fraaie Cycloon. Deze heeft tenminste slangaansluitingen van (bijna) 100 mm. De enige die ik heb kunnen vinden met die maten kostte meer dan €300,00. Deze kost een fractie van die prijs en het is ook nog eens gaaf om het stof er door te zien circuleren. Adapters van 100 naar 50 mm en slang 50mm bijgeleverd. Top ding!!

What can I say - it's a cyclone separator. It has one purpose. I had no use for the reduction accessories as I bought the separator solely for my 4" dust extractor, thicknesser and router table. I have a separate 63mm (2.5") collection system, although I may add a 100mm/63mm Y piece. The reduction accessories and hose supplied are not suited to a 63mm/2.5" system as they are smaller than required (more suited for 58mm I'm guessing). That said I only bought the item for the 4" separator and it works perfectly - being clear perspex I can see if there's ever a problem with suction.

Works well with dust and with wood chips from my planner. I connected to my 1 HP 4 inch dust collector and am happy with it. Seems well made

ottimo prodotto robusto e facile da installare molto comodo il fatto che e' trasparente in questo modo e' possibile vedere se ci sono problemi comunque sono molto soddisfatto e' un prodotto che consiglierei ottimo.

Use this in the garage for a miter saw, table saw, and planer. It works wonderfully. I use mine with a small shopvac, and even with the minimal air volume it separates great!

Works perfectly! Installed and in use in a short time and working without problems. Very nice that it is clear abs, so that you can always check if it is working correctly

This is a large size cyclone with 100 mm in and out ports. It comes with 50 mm reducers and a short lenght of 50 mm vinyl hose, screws and fitting, attach to a container and you are ready to go. The plastic material seems very solid, it could be some kind of Polycarbonate, which is an excellent plastic very very strong and tough. The hose is of lesser quality, imo it is too soft and retracts when under strong pressure, the inside is not smooth, and so not optimal, there are better suited hoses on the marked that are quite inexpensive, I use a blue hose, which is very strong and smooth inside, it sells for 6-15 €/m depending on dimensions, it is excellent, keep your hoses short. Use a powerful large volume suction machine to get the full benefit of this cyclone. Combine your DIY system with a HEPA 14 filter, and you could save several thousands of Euro. Vevor should offer a complete kit, the cyclone alone is only a small piece in a larger system. As always Vevor has a solid delivery system and an attentive service system, should something go wrong.