For heavy-duty cleaning, cutting masonry, finishing surfaces, and working with metal, VEVOR offers a wide range of grinder accessories. You can use VEVOR grinder accessories for any job, whether you need flap discs for an angle grinder, grinding wheels for metal removal, or diamond blades for concrete. Made with high-quality parts that work with most grinder brands, this range works well on job sites and in home workshops.
To finish your next job, do you need flap discs, grinding wheels, diamond blades, or wire brushes? Having the right grinder accessories makes a big difference in the quality of the work, the user's safety, and the tool's lifespan. Compatible with normal angle grinders, VEVOR grinder accessories give consistent results on metal, concrete, wood, and masonry surfaces.
Picking the right grinder attachment for the job directly impacts cutting speed, finish quality, and overall safety. VEVOR has a wide range of accessories in stock, so workers can find the right tool for the job and the material.
Flap discs are among the most useful grinder attachments for finishing and blending metal. With overlapping abrasive flaps grouped around a central hub, each disc can grind and finish in a single pass. For use with an angle grinder, VEVOR flap discs are available in a range of grits from 40 to 120, covering heavy stock removal to fine finishing. Zirconia alumina flap discs work well with stainless steel and other hard metals, while aluminum oxide flap discs work well with mild steel and general manufacturing work.
Backing plates made of strengthened fiberglass make VEVOR flap discs stable at high RPM. Flap discs are compatible with both 4.5-inch and 5-inch angle grinders because each disc can reach up to 13,300 RPM. The curved shape reduces shaking and helps keep the operator less tired over long hours of use. Users who are removing weld seams, cleaning rust, or blending surfaces can switch between grit levels without changing the tool.
When quickly removing material is important, grinding wheels are the most important part of any grinder accessory kit. High-pressure bonds aluminum oxide and silicon carbide abrasive materials together to make VEVOR grinding wheels. Aluminum oxide wheels are good for cutting steel, iron, and non-ferrous metals. Silicon carbide wheels, on the other hand, work best on stone, ceramic, and concrete surfaces.
Standard VEVOR grinding wheels have a 7/8-inch arbor hole and a 4.5-inch width, making them compatible with most angle grinders. You can choose from thicknesses ranging from 1/4-inch for general grinding to 1/8-inch for cutting off smaller stock. On the blotter label, each wheel has a maximum working speed rating.
Operators should always check that the grinder's RPM does not exceed the disc rating. The grinding wheels that come with VEVOR grinder accessories have a Type 27 depressed center profile, making them easier to work in corners or along weld joints.
Before welding or painting, remove rust, scale, paint, and other surface coatings with a grinder or wire brush. VEVOR offers both steel and stainless steel knotted wire cup brushes and crimped wire wheel brushes. Knotted wire brushes clean more effectively and last longer when put under constant pressure on heavy rust or mill scale. With crimped wire brushes, you can get a lighter scratch pattern that works well for removing paint and cleaning before applying a finish.
When using wire brushes on angle grinders, pay close attention to the maximum RPM. The speed of the VEVOR grinder wire brushes ranges from 6,000 to 12,000 RPM, based on the wire's diameter and shape. For flat areas and getting ready to weld, cup brushes work best.
Wheel brushes, on the other hand, work best along edges, corners, and pipe seams. People who use wire brush grinders should wear face shields because small pieces of wire can fly off at high speed. Threaded spindle connection or arbor hole mounting lets VEVOR wire brushes work securely and without wobbling.
When it comes to cutting concrete, brick, tile, marble, and asphalt, grinder diamond blades are the best accessory for the job. VEVOR diamond blades have synthetic diamond segments attached to a steel core. This lets the blade quickly cut through materials that would destroy regular abrasive wheels. Cutting dry concrete and brickwork is best with segmented diamond blades, and cutting ceramic and porcelain tile without chips is best with continuous rim blades.
Diamond blades for VEVOR grinders come in two diameters: 4.5 inches and 7 inches. These sizes work with both small- and large-angle grinders. Turbo rim blades are a good choice for general concrete cutting because they have the speed of segmented cutting and the surface quality of continuous rim designs.
How deep the blade cuts and how long it lasts depend on the core thickness and section height. When cutting hard aggregate concrete, operators should choose blades with a soft bond matrix. This way, the diamonds will always be visible as the bond wears away against the rough material.
The results will be better, and the accessories will last longer, if you choose them based on the material and the job. The product details on VEVOR are very clear, making it easy for buyers to find the right tool for the job.
For metal fabrication, different grinder accessories must work together in different steps. A coarse aluminum oxide grinding wheel is needed to remove dross and knock down high spots after flame or plasma cutting. To blend weld seams best with an angle grinder, use a 40-grit zirconia flap disc. For a better blend, move up to an 80-grit disc. To reach the clean base metal, use a knotted wire cup brush to clean the pre-weld joint on painted or rusty metal.
VEVOR grinder accessories for metal include backing pads for flexible sanding discs and quick-change fiber discs for orbital grinding. Installing grinder backing pads on the spindle protects flat panel surfaces from damage by giving rough discs a soft place to rest. When working on structural projects, steel fabricators can use VEVOR grinder accessories to complete all the steps needed for preparation and finishing without having to switch between brands or fitment systems that do not work together.
For cutting concrete, preparing the surface, and cleaning brickwork, you need different grinder attachments. Abrasive wheels would get too hot and break in seconds on cutting jobs that grinders with diamond blades can do. For leveling out high spots in concrete slabs, a silicon carbide grinding wheel quickly removes material without digging too aggressively. With a normal angle grinder and a narrow diamond tuck-pointing blade, you can clean the mortar joints between bricks or tiles very well.
When working on concrete or stone inside, grinder dust shrouds are very useful tools. Attaching a grinder dust cover to the blade guard and hooking it up to a vacuum will catch most of the concrete dust before it can fly through the air. Grinder dust shrouds from VEVOR can fit most 4.5-inch and 5-inch angle grinders and work with normal vacuum hose sizes. Adding a dust shroud to the grinder accessories setup is very helpful for operators who work in occupied buildings, near HVAC systems, or in small areas.
From metalwork to concrete work, VEVOR grinder accessories can cut, grind, and finish any job. You can get flap discs, grinding wheels, grinder wire brushes, grinder diamond blades, grinder backing pads, and grinder dust shrouds all in one place at a good price. Every accessory is designed to work with standard angle grinders and includes VEVOR's post-sale support. Check out VEVOR.com's whole selection and buy as many grinder accessories as you need for your projects.
For flat metal surfaces, knotted wire cup brushes are a great choice. For tight areas or curved sections, a twisted wire wheel works better. If you want a smoother finish before painting or welding, use a 60 to 80-grit flap disc.
VEVOR flap discs are size-specific, so you need to match the disc with your grinder size. A 4.5-inch disc fits a 4.5-inch grinder, and the same goes for a 5-inch. Always check the arbor size and RPM rating before installing.
Not all diamond blades need water. Segmented blades are designed for dry cutting and handle heat well. However, continuous rim blades perform better with water, as it helps reduce heat and gives a cleaner, smoother cut.
A dust shroud attaches around the grinder’s blade guard using a clamp or friction fit. It connects to a vacuum hose that pulls dust away during use. This helps keep your workspace cleaner and reduces airborne dust.
