I was keen to try this out on my wheel nuts. Just had some tyres fitted so I tested it against the nuts. It couldn't shift them but then I had to use a lot of force with an 18\" breaker bar to break them loose. They were massively over-torqued. However, once I retightened them to 140Nm with a torque wrench, I then used the impact wrench to take the nuts off with no issues whatsoever. I was bit concerned because I'd saw others saying they couldn't get this to work at 140Nm but my guess is they weren't feeding it enough airflow. Set at 90 psi this could do all 5 wheel nuts without my compressor kicking in. Very happy with my purchase. I'd recommend it but you need to make sure you feed it enough air.

Very very powerful but very very heavy definitely recommend but very heavy 😆

Works well. I have just ordered the 3/4’’ model also. This model has served me ok, but lacks the power to free some seized bolts

Bloody heavy but 2 handles so ok

Used the impact wrench a few times now it’s seems to have lots of torque and fairly light it’s easy to work with

very robust quality tool, removes nuts with ease does exactly what it should, very good value for money, thank you

This is a fantastic tool at a great price. It removed large suspension bolts on my truck in seconds which I could not shift with a breaker bar, takes out high torque wheel nuts effortlessly. Running at 110 PSI with 10mm core air line and 25l tank. I am amazed by it's performance, thank you.

Simple operation, convenient use, high cleaning efficiency.

Great tool for for removing hgv wheel nuts ..loads of power

Had to remove eight 3 1/2" dia coaxial bolts from pockets in bedplates, which had been in place since 1972 and were stuck fast. Two men on 6' tubes on both ends of a 3/4" tee bar couldn't shift any of them. This impact wrench got them out in 50 mins, one of the bolts taking 30 minutes to remove as the compressor couldn't keep up.The instructions state 175lb as the operating pressure, although we were at 125lbs.You will need a 100 series tail for the wrench and a 100 series socket for your compressor.