Customer Reviews for VEVOR Single Horn Anvil, 10 kg Cast Steel Anvil, High Hardness Rugged Round Horn Anvil Blacksmith, Large Countertop and Stable Base, with Round and Square Hole, Metalsmith Tool for Bending and Shaping

Just finish up the edges and put it on a secure pedistal, in the right hight. Bought a stone cracker and forged it to fit the hardy hole. Should have gotten a bigger anvil but I'll place a concrete block on the bottom and secure it with bolts soon to keep it from bouncing around.

Did the job. Used it to hammer flat and put edges back in pressed metal items. Cheaper and handier than buying a thick block of solid bar.

I like this small anvil. It does what I need as I do not do any heavy anvil work

Steht nicht ganz gerade, sonst Top

over all it is good, my only complaint is the the top has milling lines it is not a smooth finish. Other than that A+

Works great could be harder the hardie hole is not cut very clean and I got one with a bunch of filler. The horn is a really weird shape but for the price can’t beat it

Enclume très stable et robuste. Je lui ai fabriqué un billot en bois pour à ma taille et pour éviter les vibrations à la frappe.

This 22# anvil was mailed without any padding in a cardboard box (see photos) that fell apart in transit, and the anvil was scratched in many places. The rust has started taking over where the paint was scratched off.

Arrived very poorly packaged in a crap box with no packing material.This anvil is both cast and steel. The casting marks are clear however it is cast solid steel and not hollowform cast iron. Is it forged? Meh. Is it heat treated? Also. Meh.The top surface is a ground finish. The edges are rough, pitted, and sharp. A little grinding on the sides gets you down to clean metal and you can then break the edges to a well rounded shape.The horn is covered with a thick coat of paint with deep pitting beneath. It took some effort with a variety of flap discs, mill files, and sandpaper to remove the pitting but the steel beneath is solid.All in all. Not a bad little anvil for working at a small scale. I give it a four out five because it is about the only anvil available in this weight, and the price is okay but it does need some work to bring it up to an acceptable working state.

Ottima incudine come da descrizione. Imballaggio a posto. Niente ruggine. Peso confermato. Spedizione lenta.