Customer Reviews for VEVOR 1U Server Rack Shelf, 4 PCS, 50 lbs Max Load-Bearing Vented Cantilever, Wall Mount or Rack Mount Shelf with Tray, 10 in Depth, Good Air Circulation for 19 Inch Cabinet Computer Network Equipment

Amazing rack. Hesitant at first but found this to be just as good as the premium network racks. Don't waste your money on name brand units. Not worth the extra money.

Good build quality

Wat kun je zeggen? Gewoon prima legborden en de prijs was ook nog eens zeer goed

Je suis satisfaite du produit, est exactement ce que je voulais . Très solide et bien adapté a mon armoire.

Just received these and found that the front lip is extremely high, measured at 5/8\". I suppose this is fine for larger items (e.g. the nominal 50lb limit), but for the moment I'm putting a relatively small network switch on the shelf. The lip covers fully half of the height of the lower row of ports, forcing me to shove the switch back quite a bit for the cables to fit, and then I'm going to have to lift up the switch every time I need to connect something to it. I would recommend reducing the height of the lip by 1/2, if necessary putting either a secondary outward bend in it or a lengthwise \"dimple\" to add rigidity to the shorter lip. I'll try to remember to update this review when I've had more time using them with larger equipment (e.g. my NAS's that will go on the second shelf). In the meantime I need to find a shelf that's more appropriate for this particular location...

Excellent sturdy shelves. Work great for equipment that isn't rack mountable.

Great price, solid quality. Will be purchasing more.

Rack Shelf Pair for My 19″ Cabinet I grabbed this 2-pack of 1U shelves for my 19″ rack setup and so far they’ve been a solid little upgrade. The height is standard “1 U” so it fits cleanly into my cabinet, and the build feels respectable: carbon-steel material, decent thickness, no obvious warping or soft spots. What I like: • The shelf depth is about 10″ (254 mm) which works well for smaller devices like routers, switches, firewall boxes, or spare gear. • Perforated bottom helps with airflow (always a plus when stuff gets warm in a rack). • Screws, nuts and installation hardware included — I had it mounted in ~10 minutes with a standard Phillips screwdriver.

Fait ce qu'on lui demande, semble robuste et dispose de la visserie adéquate.

These shelves are sturdy built, they are holding my 3.5 Sony VTR's which weigh around 65 pounds each the rack has casters, but they are locked and doing great If you are looking for a quality-built shelf for a rack, this is the one, it's 16' deep and has adequate vents for dissipation of heat Vevor is the answer. I recommend to everyone and check out they're store for more quality products!