Customer Reviews for VEVOR Pro Horn Anvil 30KG/66.1LBS Weight Steel Anvil Blacksmith Blacksmith Anvil, Portable Rugged Cast Iron Anvil Blacksmith Anvil Stable Workbench Blacksmith Forge Anvil Tool

Excellent value. Not a “perfect “ anvil, but fully functional and all working surfaces flawless. Pritchel hole is too large and in a bad position. I machined an adapter that works pretty well. Rebound is better than my old anvil but not as good as some. However rebound is related to hardness and too hard would make it prone to chipping. I’m happy with it.

I bought this anvil for two reasons. 1) It has an HRc hardness of ~55, instead of only ~50 which is what the blue ones are. 2) Because the picture shows the horn and round hole being flush with the flat surface of the top of the anvil. This second reason turned out not to be the case. There is about a 1/ to 3/8 inch step there. I have since learned that the step is useful for some things but it does mean the round hole is not the same height all the way round, which makes it less useful for using it as a Pritchard hole. I plan to weld some fender washers onto the end of a pipe that will fit in that hole, and then grind one side flat to fit in the hole and solve this problem. The anvil itself is quite good, and for the price is down right amazing. Edges are sharp, so you can break the corners with a file to set the corner radiuses at the size you want. The anvil rings a bit, but I think with a magnet under the horn and a chain around the base this tones it down nicely. (other anvils also ring and can be quieted the same way)

Should give me alot of years of service,thanks vevor for giving good products at great prices with exceptional customer service.

Je suis contente de l'enclume, mais je l'ai reçue avec l'emballage déchiré. Il aurait fallu un emballage plus solide, car il était un peu léger par rapport au poids de l'enclume.

After reading the reviews I was expecting real problems with the delivery, but after one small hiccup, it was delivered just a day later than planned by two burly men in a van. Its worth saying watch your back when lifting this about.

Very good for the price. Overall very useful. The horn is a lightly rough casting and required some smoothing for finer work as does the hole , but overall the weight and design are fine for an occasional use bench anvil.

In apparenza più che ottimo le prime martellate sono state rette egregiamente , penso che per il prezzo pagato sia un ottimo prodotto.

Very good for the money. This anvil needed some “finishing off”, the casting lines on the horn, the general shape of the horn & all around the edges, I removed the coating & brought it into shape with a sanding flap disc on a grinder, then finished off with some large files. I wanted the coating off all of the main surfaces & all the edges & right angles. This was an easy job & left me with an anvil that is perfect for my own personal use. Now I just need to find or make a stand.

Good tool for workshop but finish quality needs improving or monitoring before dispacthing otherwise it's okay.

For its size a good little Anvil. I have it mounted on a Sycamore log to gain the height and have had no issues with it as yet. Mainly I have used it so far for basic forging and pattern welding.I will be making some tools for use in the Hardy hole and also a holdfast in the next few weeks but envisage little problems with this having taken away the manufacturing burrs. Hardy Hole is 25mm as its the Pritchel Hole