Customer Reviews for VEVOR Pro Horn Anvil 30KG/66.1LBS Weight Steel Anvil Blacksmith Blacksmith Anvil, Portable Rugged Cast Iron Anvil Blacksmith Anvil Stable Workbench Blacksmith Forge Anvil Tool

So when I purchased this anvil I intented to get it with the 1in squared hardy hole has my previous anvil was too small, when it arrived the hardy hole was even smaller and was circular, the other hole is big enough and I'll have to reshape the tools to fit it but besides from that a pretty good anvil, just abit too heavy for one person xD

ENTSPRICHT VOLL DER BESCHREIBUNG; IST SEHR GUT PROPORTIONIERT; MACHT SINN

De momento perfecto, a ver como responde al uso.

This makes a very good starter and Bill, was better than I expected. After several half mast and completely missed blows with a 2 1/2 pound hammer there is no damage to the face. Highly recommended.

Works great could be harder the hardie hole is not cut very clean and I got one with a bunch of filler. The horn is a really weird shape but for the price can’t beat it

Just finish up the edges and put it on a secure pedistal, in the right hight. Bought a stone cracker and forged it to fit the hardy hole. Should have gotten a bigger anvil but I'll place a concrete block on the bottom and secure it with bolts soon to keep it from bouncing around.

This 22# anvil was mailed without any padding in a cardboard box (see photos) that fell apart in transit, and the anvil was scratched in many places. The rust has started taking over where the paint was scratched off.

Arrived very poorly packaged in a crap box with no packing material.This anvil is both cast and steel. The casting marks are clear however it is cast solid steel and not hollowform cast iron. Is it forged? Meh. Is it heat treated? Also. Meh.The top surface is a ground finish. The edges are rough, pitted, and sharp. A little grinding on the sides gets you down to clean metal and you can then break the edges to a well rounded shape.The horn is covered with a thick coat of paint with deep pitting beneath. It took some effort with a variety of flap discs, mill files, and sandpaper to remove the pitting but the steel beneath is solid.All in all. Not a bad little anvil for working at a small scale. I give it a four out five because it is about the only anvil available in this weight, and the price is okay but it does need some work to bring it up to an acceptable working state.

Ottima incudine come da descrizione. Imballaggio a posto. Niente ruggine. Peso confermato. Spedizione lenta.

I have seen worse and better quality anvils.1- There was some flashing I had to cut off on the underside of the horn, no surprise, I had planed to clean off the epoxy coating and slightly reshape the horn anyway. No big deal.2-Upon cutting and flap disking the chunk off I realized the color of the sparks determined it is cast with high carbon steel, using the spark test method.2-Be careful of the epoxy coating, as I'm sure it is very toxic, wear a respirator if grinding.3-There was some fine cast pitting on the horn mainly surface, I'm sure the coatings purpose is to cover these flaws. no big deal. see pic.4-The face is flawless and the hardy hole is square and center.5-the dimensions shown in the manufactures description pictures are way off, see pic.6-as for the hardness of the face, time will tell, if used correctly it should be O.K.not too bad overall for beginners utilizing for small projects, you get what you pay for. Made in China....of course.conclusion: WE NEED TO BRING BACK ALL MANUFACTURING TO NORTH AMERICA,