Customer Reviews for VEVOR Milling Machine Worktable Cross Slide Table 10.2 x 18.5 cm Compound For Bench Drill Vise

Der genannte Fräs-Arbeitstisch ist für die Ausführung von einfachen Fräsarbeiten gut geeignet und einfach zu bedienen. Was aber vor dem Ersteinsatz beachtet werden sollte, ist das der Fräs-Arbeitstisch ohne jegliches Schmiermittel in der beweglichen Teilen, wie Schraubspindeln und Gleitschienen geliefert wird. Um zu verhindern das die Nutzung durch übermäßige Reibung in diesen Bereichen zu einer Beschädigung führte, ist unbedingt nötig die genannten Bereiche vor Nutzung mit geeignetem Schmiermittel zu schmieren. Auch eine Säuberung der Gleitflächen nach Nutzung erzielt eine lange Nutzungszeit. Alles in allem bin ich mit diesem Fräs-Arbeitstisch, nach einer Grundjustierung und Schmierung sehr zufrieden und kann ein Kaufempfehlung geben.

Good casting but required the end thrust bearings replaced.Easy job. Used to hold a job next to my milling head. Very happy with purchase

What I expected for the price was something that was basically sound but had been shoddily assembled, was probably unusable as delivered but with fettling could be turned into a decent bit of kit. That is exactly what I got! About 5 hours later and it’s pretty good, perfectly sufficient with a drill press and OK for light milling. Non existent quality control resulted in an excellent price. Rough edges, nibs, wobbling, paint overspray on running surfaces, hand wheels incorrectly sized meant that bearings and calibrated wheels didn’t work. Oh, and no grease anywhere so although easier to clean, hardly surprising that everything felt rough. However, cleaning, filing, sanding, deburring, scraping off paint and lubricating worked wonders. The hand wheels needed touching up on the lathe…the tolerances were wrong so rotating parts were either too tight or too loose. I couldn’t have done it without a lathe but it wasn’t difficult work with one and everything now runs smoothly and accurately. The cast iron is quite soft but that makes it easier to tweak. The only thing I’ve yet to do after installing on my drill press is to check the horizontals of the table. I expect it to be out but it should be easy to simply shim it up to get everything square. So if you want to use it out if the box…awful….but if you’re happy and able to put in a few hours setting the thing up properly, you’ll have a decent xy table with no side play and smooth operation for a very good price. Am I happy that I bought it? Yes. Would I recommend it? Yes…with the above provisos. Overall rating ** as received, but ***** after fettling.

Rapport qualité prix excellent.Typiquement l'outil dont on se passerait s'il était plus cher et qui facilite pourtant bien des travaux "amateurs". Très bien.

Good price-quality ratio, express shipping, great contact with the store. One of the few stores that cares about the customer and the good name of the store! However, the product has minor defects that can be removed by yourself. These are play on the cranks and the metric scale is carelessly engraved he was not influenced by it. I also recommend that you lubricate all friction elements well (for this I recommend graphite grease). DIY enthusiasts can confidently recommend the product!

Abbastanza soddisfatto. Sono stati necessari degli aggiustamenti causa distanziali in alluminio lavorati grossolanamente di elettroerosione e con superfici non piane. I volantini presentano la divisione in 40 tacche, ma le viti hanno passo 2 mm. Per il resto va bene. Da considerarsi valida.

Qualche problema nel traking della spedizione e ritardi rispetto ai tempi previsti. Il tavolo a croce arriva con qualche problema di corrosione specie sui cuscinetti reggispinta che possono essere ovviati effettuando una adeguata pulitura ed ingrassatura. I uscinetti al limite sono sostituibili con piccola spesa. Il resto sembra tutto OK, ottimo scorrimento x y.

I oggetto acquistato arrivato regolarmente, forse con un po di difficolt di tracciamento. La maniglia di chiusura della morsa non precisa nell inserto quadro, bisogna aggiustare con la lima. Qualit/prezzo pi che buona.

I needed to drill a cirlcle of holes on my drill press. This was used in conjunction with a Vevor 4 inch rotary table. I had to disassemble this prior to use as the anchor for the Y axis thread dropped out of its location and jammed the table. Drilling and tapping a thread to hold a large body washer may fix this. While you’re down there …..i cleaned everything and lubed the parts with teflon spray.. The Y axis gibs are inconsistent - snug in one position, jammed tight further along its travel. I back them out, get it where I want it and lock them down.

No esta mal contruida pero es algo tosca y dura. Hay que ajustarla y limpiarla, No tiene un manejo facil.