Customer Reviews for VEVOR Dividing Head 4 Inch Indexing Head Milling 100MM Semi-Universal Dividing Head 4 Inch 3 jaw Chuck Dividing Head Set with Index Plates and Tailstock for Precision rotary table

This is a very nice dividing head for the money. Pretty well finished and smooth operating, very little lash in the gearing.If you were thinking to use an ER32 chuck in the headstock taper note that the taper is #2 Morse not #7B&S as stated in the specifications. That is really good news given that the ER32 chuck adapter for #2 Morse is much cheaper than the #7 B&S. They are also available with 10mm drawbar threads so you can eliminate the chance of slipping in the taper.I checked the run-out specifications and found the following: Radial run-out of the spindle nose spec 0.0006" Actual <0.0002" Radial run-out of spindle taper nose spec 0.0008" Actual was about 0.001" Radial run-out of spindle taper hole 4" distant 0.0014" Actual was 0.0025" Radial run-out of test bar with 3-jaw chuck 0.0031" Actual was 0.003"So the specs were pretty close and my measurements might not be perfect. The run-out with the 3-jaw chuck was due the the chuck back-plate (spindle nose locating diameter had <0.0002 TIR). The locating diameter for the chuck had a run-out of 0.0025". That could be corrected by taking a few thousandths off the locating diameter, center the chuck and use the mounting screws to lock it in.

Great value for the price. The chuck ran out about .004 when it received it. When a slight modification, it can now be indicated in.I_ happy with the accuracy and workmanship. Now let_ see how it holds up. Great for a garage shop.

VERY GOOD

guter Preis, funktioniert, Beschreibung mangelhaft wichtige Massangaben fehlen

I haven't used it yet, but looks really nice for the price. Some sharp edges that could be cleaned up, but other than that it looks solid. Nice addition to my home machine shop!

A good product for the price and can be recommended👍

El cabezal viene en perfecto estado, tal como se describe todo muy bien, cumple con su función sin problema alguno

Di fattura non troppo curata esteticamente, con alcuni particolari da aggiustare (la mia aveva l'alidada bloccata) e con qualche dettaglio piuttosto economico (l'indicatore visivo della rotazione in gradi) ma perfettamente efficiente. Per il costo non si può pretendere nulla di meglio.

Good produkt

I am very pleased with the quality for the price. I would buy it again. It was easy to set up and get installed onto my mill.