Customer Reviews for VEVOR 15.2 cm Powerful Precise Clamping Vice, 26.9 kg Vice Machine Vice Precision Vice Accessory Set, 4.4 cm Jaw Precise Clamping Lock Table Vice

Bra maskinstikke til en så lav pris. Eneste ankepunkt er at det mangler stor skive under mutter for å skru fast stikke.

Very good vise for use both on my mill and on my drill press, it is tight, well made and very stable. This is a vise that works well for drilling, milling and general machine work.

Schon und gute Arbeit schnell geliefert sauber Sache würde ich wieder kaufen alles bestens Gut verpackt

Le poids respire la qualité, précis et à un bon prix. La finition est moyenne cependant, mais c'est pas le problème. Il manque des rainures dans les mors pour tenir des pièces rondes.

This is a pretty decent vise for a light weight milling machine or drill press. if you have a medium to larger machine, the castings are a little thin for agressive cutting. As compared to my Kurt, there is maybe 60% as much metal in the vise, which does translate to less strength. If you are using a standard bridgeport style mill the will probably be a solid choice. if you have a 7hp+ cnc, you may be able to break the vise with a heavy cut or at minimum experience some flexing that may cause trouble. In terms of dimensions, my example was well made and accurate enough for most things. Machining to +/- .001" per 6 inches is doable. Held parts square to about half that tolerance, which is ok. As with all tooling, you will need to invest time setting it up to be accurate. Wish it were made a little thicker, but it is a lot of vise for the price.

Works as intended. Vice is sturdy and is on my mill now for a few months haven't much to complain about.

Solid dependable vice, however only some areas as accurate as described

Imadło generalnie ok za tą cenę. Niestety opakowanie i zabezpieczenie towaru to dramat. Imadło zostało uszkodzone w dwóch miejscach. Opakowanie miazga. Ktoś musiał tym rzucać. Będę musiał sie jeszcze bliżej przyjżeć czy nie ma gdzieś innych uszkodzeń czy pęknięć.

Reviewing my new Happybuy 5" Accu Lock Vise. Vise arrived in a sturdy cardboard box partially filled with styrofoam surrounds, box was a little beat up but that's just from the shear weight of the vise and not having a styrofoam top liner (which should be included, that would have prevented all the shifting around in transport).Measurements (which everyone wanted to know) are as follows: 14 3/4" long without handle attached. 7 1/4" wide base flange to flange tips. 4 3/16" tall, 5" jaws, a big 5 7/8" max jaw opening (the ad only claims 5"), heavy 3/4" dia lead screw, 1 9/16" jaw height, 6 1/4" center to center base bolt down holes and a stout 36 pounds total.This is a very nice vise for the money. It arrived pretty clean (no metal shavings) with a very light coating of clear oil, all milled edges are razor sharp, crisp and very flat and smooth, the painted casting areas are nice with only a few sharp jagged spots. The paint job is great with a nice blue-green hammered look. The bag of included hardware is as others say a bit on the cheap side but that's not a big deal to upgrade and replace yourself.I spent about 3 hours cleaning, scraping, filing, sanding and oiling the vise. The entire inside lenght of both ways had some paint overspray on them that kept the jaws from moving easily. The two square cutouts up front had some razor sharp jagged edges that needed to be hand filed down to avoid seriously cutting yourself on. The entire bottom edge is also very sharp which I lightly filed and sanded back to avoid cuts as well. A very light coating of oil was applied to all bear metal surfaces to prevent rusting. I can turn the vise with just my fingers now without having to use the handle, which was impossible before fine tuning it up.I'm a serious diy guy and not a professional machinist so I'm not using this vise on a mill of any kind. I'm adding it to my big floor drill press to drill metals, plastics, woods, etc (I'm not using my drill press as a mill either, as it's not designed for side to side loading and don't recommend doing it).Overall this is a well machined heavy vise that should last forever if taken care of. I highly recommend it to a do it yourself person, not sure if it would fit the bill for a professional machinist or not. Rating it I deducted 1 star because of the amount of effort needed to be put into it. Four uploaded photos are attached. Hope this review helps you out.

Overall is a good buy. I would prefer a lower profile for my milling machine. Straight flat surfaces. For a garage work is pretty decent. Good price also.