Customer Reviews for VEVOR 150mm/5.9In Vertical & Horizontal Rotary Table, 150MM Dividing Head Round Rotary Working Table Milling Machine Index System Adjustable Screw 5.9 Inch Dividing Plate Index System

excelente atención y de verdad que la calidad del producto excelente

Embalaža v škatli je bila poškodovana,s tem pa uničena brošura z navodili za uporabo,to je razvidno na priloženi fotografiji!

Bought the unit to mount it on my tool and cuttrer grinder to give me much more flexibility and T&C capability. Only used the dividing head a few times and all appears to work as functioned and as I need it to do. Quality is fine. The tilting head allows me another degree of alignment that makes the T&C grinder able to cope with angles of sharpening tapered step drills and the like. Overall, very happy with this purchase.

I bought this indexing device to mill an octagon rifle barrel and it worked excellent for that purpose. I think it will come in handy for a lot of mill projects in the future. Thanks

It is a good product that can be adjusted. I couldn't remove the universal play, the play was between 1-2 degrees, because the screw defective and inside - it barely came out... photo: screw.jpg and inside.jpg With a tap and die M20 die 1.5 mm I solved the problem and it works very well. picture: tap.jpg I put a material so that the screw goes hard. The rest is very good. picture: good.jpg I buy again 3 product I buy again 3 product

Très satisfait de ce diviseur mandrin a ébavurer mais gros problème de transport avec colissimo voir photo (préférez ups les colis arrivent en bon état)

Cercavo un'attrezzatura che fungesse da posizionatore per forature e lavorazioni di fresatura in angolazioni difficili da realizzare con supporti generici. Quando ho incrociato su internet questa offerta, ho valutato a colpo d'occhio il grado di finitura e lavorazione di questo divisore e sono passato subito all'acquisto. Non mi ero sbagliato: il rapporto qualità/prezzo è ottimo, forse il mandrino è di fattura più modesta ma valido comunque. Io poi ho realizzato un supporto morsa (come dalla foto), che si avvitasse al posto del mandrino per ottenere la possibilità di fissare pezzi non solo cilindrici. Alla fine si è in grado di posizionare un elemento variando la sua posizione su tre assi. MOLTO SODDISFATTO

it is very good for the price

This is a very nice dividing head for the money. Pretty well finished and smooth operating, very little lash in the gearing.If you were thinking to use an ER32 chuck in the headstock taper note that the taper is #2 Morse not #7B&S as stated in the specifications. That is really good news given that the ER32 chuck adapter for #2 Morse is much cheaper than the #7 B&S. They are also available with 10mm drawbar threads so you can eliminate the chance of slipping in the taper.I checked the run-out specifications and found the following: Radial run-out of the spindle nose spec 0.0006" Actual <0.0002" Radial run-out of spindle taper nose spec 0.0008" Actual was about 0.001" Radial run-out of spindle taper hole 4" distant 0.0014" Actual was 0.0025" Radial run-out of test bar with 3-jaw chuck 0.0031" Actual was 0.003"So the specs were pretty close and my measurements might not be perfect. The run-out with the 3-jaw chuck was due the the chuck back-plate (spindle nose locating diameter had <0.0002 TIR). The locating diameter for the chuck had a run-out of 0.0025". That could be corrected by taking a few thousandths off the locating diameter, center the chuck and use the mounting screws to lock it in.

Great value for the price. The chuck ran out about .004 when it received it. When a slight modification, it can now be indicated in.I_ happy with the accuracy and workmanship. Now let_ see how it holds up. Great for a garage shop.