Customer Reviews for VEVOR Single Horn Anvil 132Lbs Cast Steel Anvil Blacksmith for Sale Forge Steel Tools with Round and Square Hole and Equipment Anvil Rugged Blacksmith Jewelers Durable and Robust Metal Working Tool

Awesome for the price!Please note, you arent paying for a high quality anvil, Like...at all.. BUT it is very good for the price and gets the job done. Has a good ring to it and decent recoil. Not the best, but good. The BLUE color is butt ugly, so i ground that down and oiled it. It is also mold formed steel. So there is ALOT of flaws like gouges in the metal. Nothing a welder and some grinding couldnt fix. There was noticeable welds that were pre done from factory. I just added to it to smooth out. Top surface was smooth. Just rounded the edges and cleaned up he hardy hole. Alot of burrs and rough edges. Over all would buy another if i needed it!

I have seen worse and better quality anvils.1- There was some flashing I had to cut off on the underside of the horn, no surprise, I had planed to clean off the epoxy coating and slightly reshape the horn anyway. No big deal.2-Upon cutting and flap disking the chunk off I realized the color of the sparks determined it is cast with high carbon steel, using the spark test method.2-Be careful of the epoxy coating, as I'm sure it is very toxic, wear a respirator if grinding.3-There was some fine cast pitting on the horn mainly surface, I'm sure the coatings purpose is to cover these flaws. no big deal. see pic.4-The face is flawless and the hardy hole is square and center.5-the dimensions shown in the manufactures description pictures are way off, see pic.6-as for the hardness of the face, time will tell, if used correctly it should be O.K.not too bad overall for beginners utilizing for small projects, you get what you pay for. Made in China....of course.conclusion: WE NEED TO BRING BACK ALL MANUFACTURING TO NORTH AMERICA,

Did the job. Used it to hammer flat and put edges back in pressed metal items. Cheaper and handier than buying a thick block of solid bar.

I like this small anvil. It does what I need as I do not do any heavy anvil work

Pleasantly surprised. I am not a Blacksmith, I just needed an anvil to help me shape metal. Rebound rate is good, price is extremely fair. All I needed to do was to take a file and ease all the edges.

This anvil is pretty soft as anvils go. First day I left some marks in it with a rounding hammer.

Braucht etwas Nacharbeit, aber definitiv besser als eine Bahnschiene!

I love this thing. For a 66 lb'er it puts up with everything I dish out! There's nothing wrong with this little anvil.

This anvil price per pound is unbelievable. The placement of the holes is a little inconvenient and not cleaned out at all but again for the price I'm not complaining. I was using a railroad track that had a rebound of about 5 and the rebound on this anvil is about 9 so its a great upgrade. If I were to change anything it would be the shrink the horn a little and have it round instead of oval and move the holes but all in all I recomend this anvil to everyone whose interested in starting blacksmithing

Steht nicht ganz gerade, sonst Top