Customer Reviews for VEVOR Single Horn Anvil Cast Steel Anvil Blacksmith for Sale Forge Steel Tools with Round and Square Hole and Equipment Anvil Rugged Blacksmith Jewelers Durable and Robust Metal Working Tool 105Lbs

Just finish up the edges and put it on a secure pedistal, in the right hight. Bought a stone cracker and forged it to fit the hardy hole. Should have gotten a bigger anvil but I'll place a concrete block on the bottom and secure it with bolts soon to keep it from bouncing around.

This 22# anvil was mailed without any padding in a cardboard box (see photos) that fell apart in transit, and the anvil was scratched in many places. The rust has started taking over where the paint was scratched off.

Arrived very poorly packaged in a crap box with no packing material.This anvil is both cast and steel. The casting marks are clear however it is cast solid steel and not hollowform cast iron. Is it forged? Meh. Is it heat treated? Also. Meh.The top surface is a ground finish. The edges are rough, pitted, and sharp. A little grinding on the sides gets you down to clean metal and you can then break the edges to a well rounded shape.The horn is covered with a thick coat of paint with deep pitting beneath. It took some effort with a variety of flap discs, mill files, and sandpaper to remove the pitting but the steel beneath is solid.All in all. Not a bad little anvil for working at a small scale. I give it a four out five because it is about the only anvil available in this weight, and the price is okay but it does need some work to bring it up to an acceptable working state.

Ottima incudine come da descrizione. Imballaggio a posto. Niente ruggine. Peso confermato. Spedizione lenta.

Awesome for the price!Please note, you arent paying for a high quality anvil, Like...at all.. BUT it is very good for the price and gets the job done. Has a good ring to it and decent recoil. Not the best, but good. The BLUE color is butt ugly, so i ground that down and oiled it. It is also mold formed steel. So there is ALOT of flaws like gouges in the metal. Nothing a welder and some grinding couldnt fix. There was noticeable welds that were pre done from factory. I just added to it to smooth out. Top surface was smooth. Just rounded the edges and cleaned up he hardy hole. Alot of burrs and rough edges. Over all would buy another if i needed it!

I have seen worse and better quality anvils.1- There was some flashing I had to cut off on the underside of the horn, no surprise, I had planed to clean off the epoxy coating and slightly reshape the horn anyway. No big deal.2-Upon cutting and flap disking the chunk off I realized the color of the sparks determined it is cast with high carbon steel, using the spark test method.2-Be careful of the epoxy coating, as I'm sure it is very toxic, wear a respirator if grinding.3-There was some fine cast pitting on the horn mainly surface, I'm sure the coatings purpose is to cover these flaws. no big deal. see pic.4-The face is flawless and the hardy hole is square and center.5-the dimensions shown in the manufactures description pictures are way off, see pic.6-as for the hardness of the face, time will tell, if used correctly it should be O.K.not too bad overall for beginners utilizing for small projects, you get what you pay for. Made in China....of course.conclusion: WE NEED TO BRING BACK ALL MANUFACTURING TO NORTH AMERICA,

Did the job. Used it to hammer flat and put edges back in pressed metal items. Cheaper and handier than buying a thick block of solid bar.

I like this small anvil. It does what I need as I do not do any heavy anvil work

Pleasantly surprised. I am not a Blacksmith, I just needed an anvil to help me shape metal. Rebound rate is good, price is extremely fair. All I needed to do was to take a file and ease all the edges.

This anvil is pretty soft as anvils go. First day I left some marks in it with a rounding hammer.