I bought this tile cutter for 605x605x10mm porcelain tiles. After some practice it is now cutting very well.

It looks cheap but cuts tiles really well doesn't need much pressure scribe and snap does the job, also the lazer is spot on

I've never been fond off these types of tile cutters ever since I had a bad experience with one albeit about 25 years ago. I needed a solution for a quick turnaround tiling the en suite in my daughter's house so, after reading the reviews, I opted for this fantastic model. When I unpacked it I was impressed by the quality feel for the price I paid, however, I was still sceptical. I took some waste tiles I had to practice with, the result - sublime! This tool is actually a pleasure to use, it's accurate with the help of the laser, sharp, lightweight yet robust and helped me tile the bathroom quickly with quality clean cuts. If you're considering this piece of kit but aren't quite convinced, take it from me - you won't be disappointed!

I use it I was very happy with the product. I will recommend people to buy it. This is the best tile cutter I used in my life. Thnks

Okay Im a little more than a new DIY_r but this tile cutter was really good. Solid, light enough to move around but robust and accurate. Hopefully my photo says it all. The tiles were 600x600 ish. Great price great product. Thanks

I am DIY, Not a Professional Tiler and got this to replace an old basic tile cutter I had, this one by Vevor is absolutely brilliant. The quality of the cutter is excellent and I was sure it would do a great job even before I used it, I was not disappointed. I needed to cut 600 x 300 flat porcelain tiles (60Total), which are a bit thicker than most at 9mm thick, but it cut through easily. Most of the cuts were quite small at about 40 or 50mm off the 600mm long edge and no breakage issues. Obviously, like all manual cutters this is really designed for flat tiles, not tried but may possibly work on a light patterned tile. If I was being picky, I would say the following could have been noted or better designed: 1) The Laser was not centred, I didnt check it and I made an error on the first tile. Maybe it was mentioned in instructions but it should be highlighted to check alignment of the laser to the cutting wheel before starting. A quick adjustment with a pozidriver and sorted. 2) The Tile Stop / Ruler does not allow small cuts to be secured with the 2 x securing bolts. A longer bracket to allow both bolts to be secured would be a simple fix. As a lot of my tiles were same cut size, I decided to make a 5min timber jig template and it works fine. 3) It would have been good if the cutting/breaking arm could have been locked up after cutting at either end, to allow easy removal of cut tile and also inserting next tile, but if careful with the cutting blade its not a big problem. The quality of the complete cutter is excellent and the addition of the Laser Light and Tile Breaker make this a great tool. I previouly bought a Vevor Stainless Steel Arc waterfall for the Koi pond I have and it is an excellent product, so when I seen Vevor selling this cutter, I had no hesitation in buying it. Basically, I would recommend the Vevor Tile Cutter...

Excellent quality tile cutter. Delivery was early than expected. Thank you. Cutting very fine and easy.....

Excellent quality didn’t think it would be this good for the price very good tile cutter 5star all around

Used it to cut porcelain and ceramic tiles and it works great. There is a bit of flex in the middle, but not enough to worry about. It was delivered within a week. Came with a spare blade as well which was a bonus.

Xl cutter Easy to use do the job nice machine for good price!!!!!!!!!!!!!!!!!!!!!!!!!Excellent thank you Regards