Customer Reviews for VEVOR Tube Roller Bender, Max 1-1/2" Manual Tube Pipe Roller Bender with 6 Dies, 360° Copper Aluminum Pipe Bending Tool for Square, Round Tube & Flat Bar, Ideal for HVAC Air Conditioning Auto Repair

I have motorized my Vevor Tube bender, works perfect and no more cranking...

I bought this roller to roll 2"×1/4" aluminum flat bar the easy way, as it was the most affordable option. With a 3D-printed slip-on roller cover, I was able to match the exact profile I needed to keep the flat bar rolling evenly. It worked flawlessly for my application. Bending this material isn't overly difficult to begin with, but I needed a consistent, clean curve, and after some searching, this proved to be the most economical solution for the job.

Fantastica ho fatto tanti progetti

Bon produit Bonne prise en charge du SAV suite à une litige, rien à redire

pros:is a very solid machine, easy to use if you don't have some industrial repetitive work (hundreds of pieces). spin the handle and the pipe is bending. cons: for long pieces of pipe the machine will bend them slightly out of center, they have to be rectified after.the rollers for flat pieces have two rings with unfortunately one screw each. they will not stand with the setting until you finish the job no matter how hard you squeeze that screw. it can't bend 60/40/2 mm only 50/40/2 max witch is a BIGGG thumb down for it's size. there are smaller home made machine who do that.another conn is that the axel of the wheels use blocking nuts, everytime you change to another position you'll have to use other tools not the bear hand.the axel of the handel is locked with a safety ring and you have to have a special plyers to unlock it. overall is a nice machine to have as a first bender or to use it as a model to build your own to your particular needs.

Très utile

Masina este destul de robusta, face ce zice inspecificatii

i pushed it to the limit (1'1/2 x 1/8 square tubing) and it did the work, its hard work off course but the job is done

Une ttres bonne cintreuse je m en sert tres bien nickel je recommande se materizl thiery 62

Can make good bends with this, will use alot