Customer Reviews for VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, Metal Rack & Leak Repair Sealant for Industry Home Decor Architecture Construction Automotive Painting, 70PSI Max

All very good.

I was a tad worried reading some of the UK reviews but other countries seem to say it was good, so at for £66 I thought I'd take the risk on it. I'm very glad I did, all seems decent quality for the price and it's a hefty bit of kit! works amazing compared to my old super cheap HVLP gun (used for painting fences and water proofer spraying), but did require a couple of little mods. first off, and this is a very minor thing that shouldn't be concerning, the little rubber disks supplied to protect the lid from the clamp pins are useless. Whilst a nice touch, they're simply not a hard enough material to to tighten the clamps onto and the clamps cut straight through them. Replace them for some bits of plastic (I used strips of very thick aluminium tape) and all is right with the world. The next issue (that is easily solved) is some of the connections were a bit leaky when tested with leak solution @50psi. a quick nip with a pair of spanners solved all the ones on the nipple fittings, but the ball valve and airline connector is a plain fitting sealed purely by the liquid sealant, tightening it will do nothing! Remove the valve, clean off the sealant from the threads, drop in a gasket and re-fit, leak solved. A couple of wraps of PTFE tape won't do any harm either if you want to go "belt and braces" I bought this specifically as it came with a 4mm gun and the reservoir is large and not on the gun itself making spraying large volumes of thick paint (such as emulsion and fence stain) possible with minimal (if any) thinning, not having to stop every few minutes to re-fill the hopper and the gun being lighter and easier to handle. I decided to test using a thick emulsion straight from the tin, no thinning. Something I would not be able to do with my current cheapo gun. I set the pressures and gun up using an old card board box to test on. Personally I found it pretty easy to dial in the gun settings to get a good pattern and was amazed at just how well it sprayed the neat emul

Super Teil geht sehr gut für Zäune

Missing the fluid to seal the threads, making this useless as it can't hold pressure without it Update: company sent replacement fluid to seal the tread and it's now working properly. Thanks for sorting this out.

Es la tercera que compro. Muy bien, ideal para tirar cola de contacto para fabrica de colchones

This paint unit is absolutely brilliant. Saves so much time painting my fence and gates , super easy to use , simple process just hook it up to my compressor, fill with paint and off you go, highly recommend this item, now as this is an aluminium container be careful not to drop it or it will get damaged,

I needed a bigger pressure pot for resin casting. This came fully assembled. I only needed to remove two pipes from the inside to make it a pressure pot instead of a paint pot. Same quality as the other name brand.

Ik gebruik enkel de drukketel om om lijm op druk te kunnen brengen. Werkt goed. Drukregelaar een beetje fragiel.

Really nice. The only thing is that maybe the metal tube that goes to the bottom of the tank should be longer or bent so you get all the paint in the tank out.

Pressure vessel holds and is easy to set up and use. Though when testing for my first use, the ball valve was leaking the pressure when attempting to tighten the fitting it sheared with little torque. Replaced with parts from hardware stores.