Customer Reviews for VEVOR Spray Paint Pressure Pot Tank, 10L/2.5gal Air Paint Pressure Pot, 1.5mm+4mm Two Nozzles Two Spray Paint Guns for Industry Home Decor Architecture Construction Automotive Painting, 60PSI Max

Bonjour, ce petit mot pour transmettre ma grande satisfaction sur le produit et sur VEVOR. Le suivit de la commande a été très bien fait. Je recommande vivement.

Ottimo prodotto di fattura piu' robusta di quanto mi aspettassi

Mi arrivato difettato il pezzo sopra che carica con il compressore

Super Teil, hat alles prima geklappt.

Nog niet in gebruik maar ziet er goed uit

The product is good except that needs some improvements. The two transparent pipes are to stiff and get curled easily thus making it difficult sometimes to handle. There should be a pipe extension connected to the straight pipe in the tank so as not to have left over paint which cannot be sprayed out and also to have a mesh filter. The rest is fine

Hat mir sehr geholfen und die Bedienung ist recht einfach allerdings ist die Pistole rostanfällig… das finde ich sehr schade ( speziell die Nadel) Aber für meine Zwecke hat es gereicht.

Super

I was a tad worried reading some of the UK reviews but other countries seem to say it was good, so at for £66 I thought I'd take the risk on it. I'm very glad I did, all seems decent quality for the price and it's a hefty bit of kit! works amazing compared to my old super cheap HVLP gun (used for painting fences and water proofer spraying), but did require a couple of little mods. first off, and this is a very minor thing that shouldn't be concerning, the little rubber disks supplied to protect the lid from the clamp pins are useless. Whilst a nice touch, they're simply not a hard enough material to to tighten the clamps onto and the clamps cut straight through them. Replace them for some bits of plastic (I used strips of very thick aluminium tape) and all is right with the world. The next issue (that is easily solved) is some of the connections were a bit leaky when tested with leak solution @50psi. a quick nip with a pair of spanners solved all the ones on the nipple fittings, but the ball valve and airline connector is a plain fitting sealed purely by the liquid sealant, tightening it will do nothing! Remove the valve, clean off the sealant from the threads, drop in a gasket and re-fit, leak solved. A couple of wraps of PTFE tape won't do any harm either if you want to go "belt and braces" I bought this specifically as it came with a 4mm gun and the reservoir is large and not on the gun itself making spraying large volumes of thick paint (such as emulsion and fence stain) possible with minimal (if any) thinning, not having to stop every few minutes to re-fill the hopper and the gun being lighter and easier to handle. I decided to test using a thick emulsion straight from the tin, no thinning. Something I would not be able to do with my current cheapo gun. I set the pressures and gun up using an old card board box to test on. Personally I found it pretty easy to dial in the gun settings to get a good pattern and was amazed at just how well it sprayed the neat emul

Missing the fluid to seal the threads, making this useless as it can't hold pressure without it Update: company sent replacement fluid to seal the tread and it's now working properly. Thanks for sorting this out.