Customer Reviews for VEVOR Paper Cutter 30.5 cm A4 Guillotine Paper Trimmer 400 Sheet Capacity Metal Base

Works very well for a manual cutter. Only have on issue. The oil for the press bar saturates the top layers. I have cleaned it several times and there is still residual oil that gets deposited on the matrial being cut. I use a scrap on top when cutting and would suggest going to a grease instead or oil. But otherwise it performs as it should.

Would be nice if the item was set up to cut properly, had to adjust cutting depth

Dommage que de l'huile sorte et salisse le papier à chaque découpe même après un bon nettoyage à sec. Pour couper une centaine de feuilles sur livret en reliure il faut serrer fort la vis si non une déformation du papier dans l'angles supérieur ce crée. Sinon fait bien le job.

This is an excellent, well-built product that performs exactly as advertised. It feels sturdy, and the cutting accuracy has been consistently straight. I’ve used it to cut roughly 1,000 pages so far without any issues. Overall, I’m delighted with its performance and would confidently purchase it again.

This is a very useful tool when you have a lot of paper to cut. It works great and I haven't had any problems.

I like my paper trimmer, does the job. So much so I ordered something else from Vevor, expecting the same quality and value but also the same experience of fast shipping. To Vevors credit it was shipped promptly and the tracking began. After a few weeks of it sitting with the courier not moving I started to make inquiries and also looking up the courier and a few looks and the company sits absolute friar category. I was told it’s delayed, just wait. Then after more weeks I was given a refund and told to have a nice life. I think Vevor thought they were doing the right thing, but I now feel I can’t order anything else from them as they use a terrible shipping company who has no intention of ever delivering to anywhere outside of the inner city

Nachdem die erste Bestellung dieses Produktes aus unbekannte Gründe nicht ausgeliefert und die bezahlte Rechnung rückerstattet wurde, wurde die zweite Bestellung ohne Probleme und innerhalb die versprochenen Liefertermin ausgeliefert. Einwandfreie Betrieb, mit sehr gute Resultaten

Vamos a comentar, para ayudar y animar a otros compradores. Necesitaba una cortadora más potente que la que tenía y elegí esta de Vevor. En este estilo es la más económica. La primera impresión... mala. Por mucha palanca que hicieses sentías que algo amortiguaba la fuerza y media cuchilla no tocaba fondo . La hoja torsionaba y producía varios efectos que hacían los cortes inservibles. Escribí al centro de atención y la respuesta fue inmediata. Con el video enviado la he soltado (30 tornillos. Vevor tiene otro modelo más fácil de desmontar e internamente tiene más tuercas de ajuste) y he eliminado las holguras con unas arandelas "en el lado interno de los ejes de la hoja", para que la arandela externa haga su función. Ahora la hoja ha quedado fija y baja verticalmente, cosa que antes no hacía. Incluso con un "click" al cortar la última hoja, que antes no cortaba. También he corregido la horizontalidad de la barra de presión. Un poco tedioso pero no difícil. Ahora muy contento. Pero si no eres "manitas" y tal como llegó, mal asunto.

Not sure why there are so many downratings. Mine arrived in reasonable condition. The positives are that this cutter is a fraction of the price of larger guillotine cutters, and produced a sharp, clean and accurate edge. The negatives are that it was about 1/16 inch off, there was no way to adjust out the error (the measurements are fixed). I found the safeties to be useless. It locks the blade in the down or up position, and must be overridden to function. In the up position, the blade is clearly exposed. Unlike other guillotine cutters, the blade does not fit against the clamp in the up position, so the blade is exposed. Thus the machine being "safe" in the locked up position made no sense to me. The cutter side safety shield also made no sense to me, since it makes the exact cut point hard to see and still does not stop hand contact with the blade. The moral of the story is your safety is in your own hands. Keep the machine blade down when not in use, and take extra care when the blade is up. Fear the blade!

Awful, it doesn't cutter paper In a straight line or all the way through as it should do nothing had lines up once, the cutter is so bad. Ruined everything it has touched.