Customer Reviews for VEVOR Motorcycle Scissor Jack Lift 499.5 kg Wide Deck Hoist Stand for ATVs Bike

J’en ai acheté deux pour déposer une batterie de voiture électrique plus de 500kg et le cric a très bien servi . Le cric est stable, robuste et fluide à utiliser. Je l’attendais à un peu de fragilité et de jeux dans l’usage du cric mais finalement non. A voir sur plusieurs utilisations. Il fait son poids et cela renforce le sentiment de solidité Seul point visuel qui peut être éventuellement fragile est le roulement autour de la barre qui sert à tourner le pas de vis. Fourni avec une barre métal de verrouillage de sécurité et douille clé manuelle. Livré très rapidement comme d’habitude avec vevor.

I bought mine to raise heavy TrueNAS boxes higher to make maintenance easier, because lab lift jacks were far too small. It came in a tough cardboard box with a push-over cardboard lid taped on, which was necessary, because it is noticeably heavy. It was OK to turn the scissor hex bolt, using the supplied box spanner, with no noticeable lube, however it may become much harder under load, so I suggest two adaptions: 1. At least lube the hex-head scissor bolt just where the head touches the deck and along the full length of its thread, with spray-on grease or graphene, because I didn't notice any. Other moving edges may also need lube too, because paint probably isn't a great/lasting lube. 2. Use a long-bar ratchet wrench with correct-sized hex spanner head, instead of the supplied box spanner, to provide a lot more leverage and easier turning, and this may better protect you it a heavy object (e.g. a Motorcycle) falls off it for any reason, while turning the hex-head thread bolt. ================ Update 2026-04-07 Like planned, I also used it whilst building and troubleshooting a new 12-bay NAS box, with the lift on top of an Ottamon-like smooth topped wheeled storage unit, allowing me to adjust the height for both seated and standing work, and also usefully rotate it on top. I later used an ALDI 12V motorised ratchet-wrench, with its 1/2" to 3/4" adapter and 3/4" socket-set spanner head, to raise and lower the lift, because it was faster and easier than using a manual tool. I suspect that some of the breakages reported in some other reviews may have been avoided by separately lubricated the threaded rod and all other areas where friction could be expected to occur, to significantly reduce the forces/friction exerted upon the thread and the resulting forces at its hex head. The manufacturer really should have supplied it pre-lubricated with heavy grease!

Outil simple, solide et efficace comme nous les aimons; Suffisant pour soulever une moto(la mienne fait autour de 250Kgs) et assure l'entretien courant en sécurité, roues hors sol.

So far they have been reliable and my tool collection is growing I would like to see single tools some time I don't need a whole set.

Almost exactly like one I bought for 2x more. The only problem is the better construction made it a little thicker, and does not fit as well under a lowered MC.

For the price I couldn’t ask for more, it works and looks like the quality is reasonable

Snelle levering, compacte motorlift die ik nu gebruik voor onderhoud aan mijn motor. Het opkrikken van de lift met motor erop gaat het makkelijkst met een dop en ratel. Dit omdat je dicht op de grond zit voor het draaien. Verder werkt deze goed en doet het waar die voor aangeschaft is.

Gewoon goed ding, top.

Super degelijke lift, groter dan ik had verwacht en heeel zwaar. Absoluut waar voor je geld

Super goed verpakt snelle levering en goed koop.