Customer Reviews for VEVOR Manual Tire Bead Breaker, 96.5- 106.7 mm Tires Changer Tool, Heavy-duty Bead Breaking, Easy-Operated Tire Repair Tool for ATVs/UTVs, Tractors, Trucks, Cars, Heavy Duty Tires

worked well would buy again

Really happy with this purchase... I wanted to install "balance beads" to a set of large offroad tyres. I did the first by inserting the beads through the valve - took me almost 3 hours. So, I purchased this bead breaker and did the remaining 3 in less time. It works really nicely, smooth pressure etc., but if I was to suggest an improvement it would be to round-off the base a little... there are 90deg corners pushing into the tyre sidewall. Once you figure out that you can use the locking arm to pull the breaker between the tyre and rim it works great!

I’ve used this on tuck and trailer rims, and it worked great. Very happy with this purchase.

Initially, I was pretty impressed with this tool. I have 19" low-profile tyres and they are hard to break the bead. Even dropping the weight of my vehicle down onto a wooden block as I'd seen on YT didn't work. But this tool got the job done. It takes a bit of practice though as it can scratch your wheels (inside) if you are not careful. However, I just used it with my new air impact wrench and the roll pin that secures the top nut just sheared in two. I didn't know it was held together by a roll pin or else I wouldn't have attempted to use an impact wrench. So now I have to repair it and stick to using a regular ratchet and a bit of elbow grease. The problem with a ratchet, though, is the tool will experience a turning force and you'll be fighting to keep it from twisting out of position, which is why I wanted to use the impact wrench. So that is a downside. EDIT: I replaced the roll pin with heavy-duty 6mm roll pins. Just used it with my impact wrench with no issues. I had to drill out the hole as it was slightly undersized at 5.8mm (which probably contributed to the roll pin failing). The roll pin I removed was completely compressed, which also weakens it. These new pins seems much stronger so hopefully I won't need to replace it again.

Ya he comprado varias veces este producto y funciona perfectamente siempre tengo uno en reserva porque lo utilizo bastante por mi trabajo

Bon mais pas pour jante aluminium......sous risque de les rayer comme il faut, sinon ça marche pas mal.

Tool works but takes some practice to get it to work well. You have to tighten it a lot (more than you think it should require) to get it secured to the wheel or it slips off. Some times you have to push the bead off a little to get the tool down far enough or you may damage the side wall of the tire just pushing it in. But once you get it figured out it seems to work pretty well. It is built well and should hold up to use.

Es werden automatisch keine Rechnungen verschickt, erst nach dem man den Kundendienst angerufen hat. Es gibt keine Rubrik Rechnungen abrufen. Solange bewerte ich den Dienst am Kunden negativ. Das betrifft nicht das Produkt. Das Produkt ist für große Felgen zu empfehlen , bei kleinen eher schlecht einzusetzen.

Bought this to break beads off of large farm tractor tires. Did the job well. A bit pricey but worked good.

Bien reçu rapide mais l'emballage ds un mauvais état heureusement que c'est pour bosser dehors si vraiment saurais été un appareil fragile dedans il aurait déguster