Customer Reviews for VEVOR Rolling Mills 3"/76mm Jewelry Rolling Mill Machine Gear Ratio 1:2.5 Wire Roller Mill 0.1-7mm Press Thickness Manual Combination Rolling Mill for Metal Jewelry Sheet Square Semicircle Pattern

I have been very happy so far with this rolling mill. It functions well and I have very few gripes with it overall. My only issues are that it does not come with bolts to secure it to your work bench which is necessary and the hardware and design of how the crank attaches to the mill leaves alot to be desired. Other than that I would say any beginner looking to find a cheaper alternative to durston or pepe tools has found what they are looking for in the vevor rolling mill.

My rolling mill works great, the rollers came perfectly level(within .01mm between the highest and lowest spots), only issue it had was the main height adjustment gear came with a bunch of surface rust on it from the factory and needed a good amount of cleaning. everything else was fine though

Does what it says! Recommend 👍💯 1 tip: I'm missing a rubber foot so it doesn't slip.

It’s still going strong for me about a year later. I do this for a hobby, but I use it to make bezel wire, sheet, and use it for wire too and the half round has been nice too. All around good product for the price. Just make sure to keep it oiled so it doesn’t rust. I’ve done copper, brass, and silver with this. So it could for sure handle gold aswell.

Buonissimo prodotto, un piccolo laminatoio ma molto utile ben strutturato e di facile utilizzo, intuitivo. Dispiace che alcuni modelli più grandi non sono commercializzati nel mio paese. Comunque è un laminatoio che risolve le esigenze di utilizzo più richieste. Massimo

Its OK quality, fits very well for silver/gold, for copper/brass rollers are too soft.

Very nice product

I'm now very happy with this rolling mill, but only after having to return it and receive a replacement, which, given that the box weighs about 19kg, was not all that easy! Overall it's excellent value, especially as I bought it on offer, if you're not willing to pay upwards of ten times more for a more traditional brand. Pros: * Excellent value for money. * Solidly built and heavy but still quite compact and manageable - can be bolted to a bench, though I found it quite useable without doing so. * Good gear ratio so fairly easy to turn. * Extension roller for half round wires, with an extra roller for wider wires included, leaving a good width for flat sheet. * Gearing design allows for up to 7mm thickness, yet still rolling down to 0.1mm or less. * Independent L and R height adjustment allows accurate levelling of the rollers, or \"unlevelling\" them for special effects. * Accessories pack containing a plastic ring size gauge, tiny polishing cloth, equally tiny double sided abrasive stick, and (oddly but usefully) a dinky little real agate burnisher! Cons: * Various quality control issues - the first one I received had some rust on the handle axle (though that's cosmetic only), and corrosion on the lower extension shaft so that the roller was jammed solid and couldn't be removed. The replacement mill had some very slight rust pitting on one roller, though fortunately only between one of the square wire groves so won't affect the results. There was also some rust in the grease on the main gearbox, bit that should be ok. * Some of the parts seem designed for an earlier model - the two long bolts are presumably for fixing it to a bench, but they're really too thin and anyway the mill has holes for four - I've bought some M8x40 hex head bolts instead. Also, two M5x10 bolts are provided, but only one is needed, for attaching the handle. * Although the main body is held together with hex-socket bolts, there are about five cross-head bolts for other parts, which are ridi

I'm now very happy with this rolling mill, but only after having to return it and receive a replacement, which, given that the box weighs about 19kg, was not all that easy! Overall it's excellent value, especially as I bought it on offer, if you're not willing to pay upwards of ten times more for a more traditional brand. Pros: * Excellent value for money. * Solidly built and heavy but still quite compact and manageable - can be bolted to a bench, though I found it quite useable without doing so. * Good gear ratio so fairly easy to turn. * Extension roller for half round wires, with an extra roller for wider wires included, leaving a good width for flat sheet. * Gearing design allows for up to 7mm thickness, yet still rolling down to 0.1mm or less. * Independent L and R height adjustment allows accurate levelling of the rollers, or "unlevelling" them for special effects. * Accessories pack containing a plastic ring size gauge, tiny polishing cloth, equally tiny double sided abrasive stick, and (oddly but usefully) a dinky little real agate burnisher! Cons: * Various quality control issues - the first one I received had some rust on the handle axle (though that's cosmetic only), and corrosion on the lower extension shaft so that the roller was jammed solid and couldn't be removed. The replacement mill had some very slight rust pitting on one roller, though fortunately only between one of the square wire groves so won't affect the results. There was also some rust in the grease on the main gearbox, bit that should be ok. * Some of the parts seem designed for an earlier model - the two long bolts are presumably for fixing it to a bench, but they're really too thin and anyway the mill has holes for four - I've bought some M8x40 hex head bolts instead. Also, two M5x10 bolts are provided, but only one is needed, for attaching the handle. * Although the main body is held together with hex-socket bolts, there are about five cross-head bolts for other parts, which are ridicu

Good mill for the money, just keep in mind its not super durable and not going to be suitable for any work to tight specs without some tweaking but over all great value.