Customer Reviews for VEVOR Pallet Forks, 907.2 kg Clamp on Pallet Forks, 109.2 cm Total Length Tractor Bucket Forks with Adjustable Stabilizer Bar, Heavy Duty Pallet Forks for Tractor Attachments, Skid Steer, Loader Bucket

OK for price but cross member broke on first use. will have to weld on stronger box section

Forks are good but the bolts that clamp on the bucket bend very easy :( Maybe user error but I'm sure the were secure before I moved the logs and pallets Welds on nuts broke so maybe that was the problem and it happened on both forks at seperate times

I bought these back I September 2026. Do to injuries. I just opened these on November 6th. Looks great, well built. Just missing parts. I got the 4000 lb set. 2 screws per fork. I only recieved 2 bolts. I can use them with out the other screws. I don't want to damage the forks, or my bucket. Hopefully Vevor will step up and send me the missing parts.

Love these forks. I also bought the fork extensions, vevor needs a set fork the bucket forks. I modified mine. See the photo below.

10/26 fourche 3 point. Ces Cat1 alors fait pour petit trateur. Assez solide. Mais les attache du bas son trop basse et ne dessans pas assez. Je doit le modifier! Kubota BX23S 2022

Prima aan gekomen .Alleen ontbreek er een pen voor de hefinrichting Jammer moet die gaan kopen hier op het drop hoop dat ze er een hebben

Overall, product seemed to be a good product until however, I found the hardware used to tighten the forks to the bucket inferior because the "flange nut" intended to hold the forks firmly simply stops turning when it touches the buckets edge and the threaded rod it's attached to only applies pressure over a very small area and doesn't keep the forks from rotating out of alignment. In addition the crossbar intended to also help keep the forks from moving sideways is only held tight by a wingnut too small to tighten sufficiently to keep bar and forks alligned. I purchased this product to assist in picking up small limbs and branches around yard but proved to be insufficiently capable of staying aligned thus too much trouble without actually welding the forks to the crossbar.

Theses are nice but not safe for heavy loads while attached to you tractor bucket. Causes to much weight in the front

I found the forks absolutely useless and a complete waste of money!!! First, I had to file the divider down to fit it over the forks. Second, When I tightened the bolt to keep the divider at a constant width, it snapped quite easterly and Third, The forks wouldn't stay tight on the FEL bucket, it didn't matter how tight I initially tightened them. Typical CHINESE RUBBISH, I should have known better. I would be VERY hesitant to buy anything from Vevor again.

They are a pain in the A## to use, always slipping, even with a plate under the hold down area, they bent my bucket. I will be welding them permanently to a plate