Customer Reviews for VEVOR Chainsaw Mill and Rail Mill Guide System, Portable Sawmill 36 cm-91 cm Guide Bar, 2.74 m Aluminum Saw Milling Rail Guide with Chainsaw Planking Mill for Woodworkers and Carpenters

Effettua lavori di taglio alla grande, perfetti.

The mini sawmill good value for the money easy assembly it mostly all aluminum except bolts and nuts . Good quality built.

First of all I want to thank the customer who left the detailed review in October of 2023 it saved me the trials and tribulations of trying to make this work, that review just made sense, I removed the leveling screws as I knew they would vibrate loose then added loctite to all fastening screws that were not adjustable then removed the the pegs that you drive into the log to hold the rail in place and used those brackets to screw the rail system onto a 2x6. I then leveled the log and tacked the 2x6 and rail system onto the log making sure it all was level before making the first cut. I made sure my first cut was below the depth of my screws that I used to tack the 2x6 to the log so I would not hit them with my saw. I had the same results as that previous customer and was able to achieve some very nice straight and uniform slabs.

I bought it just to cut up a few trees and so far I have no complaints about it I would recommend at least a 24in chainsaw

Well priced well made . Everything I have bought from VEVOR has been well made I will continue to buy more VEVOR products

If you are buying this then you know what it's for, the frame comes in 3 sections and if set up correctly you can leap frog to do longer slices. I would have silicone spray to lube the rails Definitely drill a extra hole on the chainsaw bar near the motor to hold it more firmly.

Now I don’t live in Alaska BUT this thing makes it feel like I do! Works great I milled up some dead ash.

Overall great value. The mill itself was relatively easy to assemble and has worked very well so far. The guide rail was also easy to assemble, but is a bit unwieldy. After a couple long cuts, I switched to a 10 ft 2x6. Maybe save a few bucks and get the stand alone mill. I look forward to using it a ton.

Excellent customer service!!! I had an issue and they went above and beyond to solve the problem. Thank you

Works great even for a novice. If you're on the fence it's atleast cheap, and does what it's supposed to (including collect dust)