Customer Reviews for VEVOR Bucket Tooth Bar, 60'', Heavy Duty Tractor Bucket 7 Teeth Bar for Loader Tractor Skidsteer, 4560 lbs Load-Bearing Capacity Bolt On Design, for Efficient Soil Excavation and Bucket Protection

Very well built and strong

The inside dimension of my JD bucket was 49.5". So I welded on a small piece of angle iron to each end of the tooth bar and bolted it to the bucket. I didn't use the through bolts for the base, I used the supplied set screws. If you find the bar slips off the blade edge, add a few short weld "bumps" immediately forward of where the set screw contacts the blade and it won't slip. You'll then have a removable tooth bar! Great value, recommended.

Awesome

This bar is probably breakable, but you’d need a heavier tractor than the one I have. I could bore holes in the bucket and put the provided bolts in it, or I could weld it on, but I think I will just persist in taking it on and off with the jam screws provided. It is a great value for raw landscaping.

Lo compre para una pala cargadora de un tractor compacto de 25 HP era un poco grande y la tube que cortar un poco, para cargar arena o tierra que este suelta no hacen falta los dientes pero como son fáciles de poner y quitar .... Pero cuando es tierra dura o hay piedras la cuchara con los dientes funciona fenomenal.

This Bucket Tooth Bar is extremely well made and is of Great Quality!! It arrived in just two days, packed well and the price was really good!!! I will definitely buy from this wonderful company again!!!!

Great product for a great price. Easily adaptable to my Tractor. Fast delivery.

These worked very well for us. They stay pretty secure on the bucket and come in handy.

Quality was above expectations. It has been beat up and held strong.

My tooth bar came preassembled with the teeth already attached to the plate. THANK YOU FOR THAT! It save me from having to punch the pins all in. My pucket was just under 50" inside width so this was a great fit for it. I have used my bucket a few times to push on trees so it is not a perfect straight edge even though I got it aligned pretty well. This assembly helped strengthen the bucket and I also used it with ropes and chains on the teeth to help lift some HVAC equipment for transport. I think I will keep the bar on for a while to test it out in the woods. It will no longer give you a perfect smooth front edge since the teeth stick down about 3/4" below the bucket surface. I did not drill holes and simply use the large set screws with some HF medium loctite and a impact gun. Lined it up and slowly worked each screw gradually ....pulled my bucket edge even straighter! It is securely attached now and pretty heavy duty...more so than the front of the bucket edge was. I also followed someones advice and topped the setscrews with clear silcone to keep the dirt out. For the price you will not find anything close to this thing and it will last a lifetime. I think shipping was free too which normally would be very expensive!!