Customer Reviews for VEVOR Bucket Tooth Bar, 60'', Heavy Duty Tractor Bucket 7 Teeth Bar for Loader Tractor Skidsteer, 4560 lbs Load-Bearing Capacity Bolt On Design, for Efficient Soil Excavation and Bucket Protection

I have an older skid steer with a bucket that never had teeth on it. After a lot of searching I found these bolt on teeth. They are well constructed, and did the job after I figured out what to do with them. And here it the reason why I took off one star for ease of use: The documentation. Yikes. Let's not mince our words on who is buying something like this from Vevor: People who are not deeply into the world of heavy equipment. People like myself may need a very straightforward explanation on how something like this *should* be attached to your bucket. Of course, once I figured it out, it is obvious. However, the following bit of verbiage could have saved me a bit of figuring time. "These teeth can be attached one of two ways. By tightening down the hex key set screws you can attach it temporarily. However, if you would like to have a more permanent attachement, drill holes in the blade and use the included bolts" There we go. When written out, it is obvious. Otherwise, the quality seems quite nice for a generic add on attachment, and I feel I will get a lot of use of it. A recommendation for you is if you are going to use the hex key set screws, I would recommend drilling very shallow partial holes where the keys will seat in your blade. This will prevent them from sliding off during something that pulls back.

Well made, Great price. The holes didn't line up with my Bobcat bucket, but it could have been easy enough to drill out the tooth bar to match. I plug welded it instead through the mounting holes and stitch welded it to the bucket. The quality of the bar gave me confidence enough to just permanently attach it.

Works awesome, turned my skid steer smooth edge bucket into one with teeth quick and easy. Way cheaper than having to go buy a whole other bucket. Digs dirt great now!

Easy to install and really made a big difference on my bucket when digging in ground, my tractor is completely another tractor compare before with out the attachement,

Installed this bar on my Bobcat CT1025 and it is a nice upgrade. It is tough, digs great and tears out heavy brush with ease. Installed easily. I did have to cut a 1/2 inch off the sides to make it fit on my bucket. I do like the rivet fastening system.

A solid and very well designed implement. Easy to install using the set screws alone. The included bolts can be used for more permanent attachment. I worked for an hour with it. Bombproof! A big upgrade on the bucket.

I was looking for a simple option to add teeth to my tractor bucket. This product worked out great. It allows me to easily add and remove the teeth for different projects without much hassle. Simply loosen or tighten a few bolts.

works great easy to in stall and remove.

Heavy duty and makes a compact tractor even more versatile. Easy to install and take off as needed. Worth the money.

Perfect, works great good price thank you