Customer Reviews for VEVOR 20U Open Frame Server Rack, 23-40 in Adjustable Depth, Free Standing or Wall Mount Network Server Rack, 4 Post AV Rack with Casters, Holds All Your Networking IT Equipment AV Gear Router Modem

Excellent product that now contains a 1U ethernet switch, 1U power bar, KVM, and several component shelves. Easy to assemble with a power screwdriver. Just make sure the clutch is set properly so you don't overpower and strip the screws.

Probably the best rack for mo ey on the market. Seriously sturdy, easy to assemble. Recommended for studio owners with many outboard equipment or anything in 19" format.

Bought this server rack for my homelab. It was easy to assemble. Followed the instructions and had it assembled in about 1 hour. Mounted my HP servers and workstations, Cisco switch, KVM switch, and PFsense router. The included trays were perfect also. I highly recommend this rack. A few more RUs would’ve been perfect.

For those having difficulty assembling this 4 post rack: Yes instructions could be better on a couple steps, but I'd guess you also have difficulty assembling most items overall anyways. Details are in the pictures on which way to assemble this 4 post open rack. Pay close attention to the pictures at the ends of the pieces, as they are shaped differently and if you note the position correctly, you won't have any issues at all. NOTE: Do not try to drill a hole with the electric drill you will need to use, once the threads are cut immediately stop when the head of the screw touches the metal. Items to note: 1) The height of whatever 4 post rack you are looking at does NOT include the wheels. I bought the 20U model which stated 38.7 inches, and with the wheels on comes in at just under 41 inches. 2) Weight capacity says 500lbs. No way this is even close. Instructions as another has shared clearly says 200lbs max. 3) You are going to need an electric drill with a #2 bit. I used a Milwaukee M12 1/4" impact with a magnetic 4" bit extension and it worked fine. Set on power setting 1. Not one thing can you use a regular screwdriver when installing this, except to mount the 2 included shelves at the end. So if you don't have an electric screwdriver I would recommend the Milwaukee M12 series or similar. 4) You don't get one of those thin flat cheap wrenches for putting on the wheels. If you want to put them on it's a 9/16 or 14mm open ended wrench. Snug is all you need for the wheels. 5) The first step is the most important one, if you intend on extending the depth for you 4 post open rack needs. Instructions mention, but not a lot of detail. I set mine at 32in deep, which leaves 9 open holes on each end as you assemble the depth rails on the first step. Adjust accordingly for your depth needs. 6) Also note, if you need the depth to be over the 23" default depth, the top metal piece isn't going to cover the entire top. I put mine covering the front of the rack

Use both the installation video which they have, and the manual, and the diagram chart, separate your pieces piece by piece by number, lay out the base on the floor, ensure you have it all in the correct directions, the top and the bottom rails make sure you get those directions right, i used a evergreen drill, yes the holes are a bit small but you just crank up the settings on your electric drill, depending on the part and holes, usually on the higher end, lower end for some panels. This is a really good deal. I have some 32" servers so this was the cheapest and I'm surprised the quality is good as well, nice paint coating on it, feels sturdy. I did this by myself just resting it in various ways to get it to work, on a chair, table, etc.

Muy sólido y fácil de construir. Las piezas encajaban bien. Muy contento con la compra. Gracias.

Excelente rack tiene buen calibre el material se siente robusto , es muy práctico para acomodar todos mis equipos

very good quality, a little heavy but otherwise very good and reasonable for the quality.

Das Server Rack ist für den Preis ein echter Schnapper. Das Rack ist stabl und hat genug Tiefe für einen Server (Dell R730), und sogar noch mehr. Der Aufbau ist einfach und schnell. Es werden genug Schrauben mitgeliefert. Der einzige Abzug ist, dass die Löcher für die Schienen ein wenig zu weit weg von der Kante sind und so die Rackschienen nicht im EasyClick System eingehängt werden können. Ein wenig Schleifpapier und ein bisschen Zeit, hilft aber, da nur die Lackierung im Weg ist.

Amazing ! work well