Customer Reviews for VEVOR 16 Gallon Fuel Caddy, 7.8 L/min, Portable Gas Storage Tank Container with Hand Pump Rubber Wheels, Fuel Transfer Storage Tank for Gasoline Diesel Machine Oil Car Mowers Tractor Boat Motorcycle

Works just fine, the only thing you have take into account is the fact that, when you mount the hoses dont forget to use a sealant like hylomar or so , to seal the connectors that go in between the hose and the fuel tank pump. Otherwise it will leak fuel.!

The fuel caddy is great it works just how it should. The hose clamps provided with it don’t work the best and are a little on the narrow side I had to replace them to get it to quit leaking around several of the hose connections.

works great other than some fittings did not hold up to 93 octane

Easy to use but does need some type of handle or spot on the bottom to be able to lift it out of the truck bed after filling. Handles are something that really need to be fixed. This is the second fuel container we have bought and the handle breaks. I made one out of flat steel and it works great.

Works good.

My fuel caddy leaks at the valve that is on the unit where the hose attaches. This fixture is already installed when it arrives. I have not figured out how to stop it leaking. We store it flat and use it outside so the leak doesn't get all over the garage.

Works great had two leaks i had to reseal ,besides that it's perfect, saves me climbing up on mill with 5 gallon container

Overall pretty good buy, it does have a couple small issues, like others I found the hose clamps to be pretty cheap and not that trustworthy. Easily remedied by using better ones than provided. The other issue is the axle just snaps in not bolted down making it possible for the wheels axle and all to poo off when dragging it over heavey gravel when tank is full.. other than that I'm pretty satisfied with thus tank.

Après montage des colliers de serrage pour les flexible de mazout, afin de serrer les tuyaux, j’ai remarqué que les colliers ne sont pas assez fort et que les raccords ne sont pas étanches

The connection of the valve to the tank was leaking. Needed to exchange it with a better quality gasket teflon ring. The original gasket was a very soft rubber one that didn’t stay in the right position.