Customer Reviews for VEVOR Manual Hydraulic Pipe Tube Bender Machine 10 Ton Manual Hydraulic Tube Bending Machine 6.4–25.4 mm Diameter 6 Dies for Heating and Piping Construction

Grundsätzlich funktioniert das Biegegerät gut. Die Passgenauigkeit der Komponenten könnte allerdings besser sein, dann müsste man nicht soviel ausgleichen. Die Bedienungsanleitung ist allerdings nur in englisch und so klein und unübersichtlich in den Skizzen, dass man es kaum erkennen kann. Da besteht deutlicher Bedarf an Nachbesserung. Ansonsten lässt es sich damit gut und kraftvoll biegen.

If there was manual/instruction for use I would give it a 5

This looked great on a deal, but when I got it I realized that it has to be bolted down really well. As a result, I have nowhere to put it. This is 100% my fault, but if you are going to buy this, realize you need a very stable platform for it to be able to use effectively.

Works well. For the larger sizes it may pay set it up on a vertical surface. So pulling down using body weight makes it easier. It is NOT a pipe bender. Thin wall ERW works well. 16 to 19 mm dia is the sweet spot. Used for making carry racks on my motorcycle.

Works well for the price, all the pin, and die holes are a little clunky and loose, but overall I'm happy with it.

Buen producto, precio adecuado a su desempeño, sin problema, justo lo anunciado y requerido, su operacion es correcta

Works well dose everything I need it to do I would how ever recommend getting the stand or bolting it down to a very sturdy base or stand

Works as it should, but you have to replace the M14 bolt ta an 100 mmM14 half tread before using! A drill pattern or mounting had been great.

About this tool and built a stand for it. Bent some tubing on it and everything seems to work fine. The only thing I changed was I used the larger tube retainer on the smaller diameter pipe so I could easily remove it if I have a bend in the middle of something. The pipe retainers tend to leave a little dimple in the metal but you can slip a piece of wood or leather in between the pipe and the retainer ring you're using the larger one and avoid dimpling the metal. You could also fabricate a slightly better tube retainer if you are so inclined.

Encomenda ok. A máquina em si parece boa, ainda não experimentei com os tubos de aço. Em relação preço/qualidade penso que é bom.