Customer Reviews for VEVOR Manual Tile Cutter, 1200mm, Porcelain Ceramic Tile Cutter with Tungsten Carbide Cutting Wheel, Infrared Positioning, Anti-Skid Feet, Double Rails for professional installers or beginners

Der Fliesenschneider ist nicht eingestellt, der Modus ist nicht genau

Dommage que la règle perpendiculaire à la coupe ne soit pas d'équerre ainsi que le laser, ce qui oblige à tracer des 2 cotés du carreau et visé la molette de coupe

The alignement of the cutter on the base is offset You have to align it and drill and grind the plastic at the end of the frame The frame is to soft When you cut and try to press to split the tile, the frame bind and it become hard to split I have to had steel piece under all the lenght the strength the frame After all that it's a good cheap tool

Could not get the laser to calibrate. Not easy to line up. Once lined up it cuts nicely.

The cutter is not square so the laser does not help. To make exact cut, it is necessary to place a tail checking whether the cutting wheel is placed on the top of the intended cut line on the one side of the tail, then on the other side so preparing for the cut takes time and adjustment. Beside of that, the video of the product and the manual attached to the product depict totally different version of the cutter (the real one does not have side supports and adjusted angle ruler). Customer service was not helpful at all so I did not get any replacement, I had to use what I got.

Not the best, have to make alot of adjustments to get straight cuts, laser is never aligned with cutter don't bother using laser.

Works well for shorter lengths. Lacks strength for larger 4 ft porcelain tiles. Tried several tiles. Scored fine, but did not snap along long scores. Ruined several $75 tiles. Works fine with smaller tiles, bar bends with larger tiles. Planning to return.

Ho acquistato un tagliapiastrelle da 1200 ed è arrivato dopo ca una settimana, il prodotto si presenta bene ma non sembra di buona fattura. Provato ad utilizzare ed il raggio laser fuori linea si può registrare ma è impossibile allienarlo, provo a posizionare la mattonella e mi accorgo che è fuori squadra che è impossibile tagliare le mattonelle. Il 27/03 contatto l'assitenza e mi rispondono dicendo che valutano il problema, ad oggi 1/04 nonostante il sollecito non mi hanno risposto, molto negativo buttare i soldi, adesso chiedo il reso.

Maszynka się wygina przy cięciu, regulacja jest mega ograniczona. Wiele płytek po prostu nie chce się łamać. Nie dajcie się zwieźć mega super opiniami i recenzjami, nie nadaje się do profesjonalnych zastosowań.

Nothing but junk